News and Events

Kolt make KMBM02 series is an isolated quarter brick module, input voltage range from 16-40 VDC and output 12 V/300Watts with very low ripple.  The Converter (with an KRFL filter) is designed to meet MIL-STD-461G, MIL-STD-810G and MIL-STD-1275E. Read More

TIB-REM480 is a compact, DIN-rail mountable redundancy module for failover operation of AC/DC power supplies.TIB-REM480 is specifically designed, tested, and approved for operation with Traco Power’s TIB line of DIN-rail mountable power supplies. Read More

The New Cincon AC/DC Chassis Mount Power Supply, PDF700S-CMFC(D/D-P) series is with Universal AC Input, Single Output 12-56VDC and of 700W. The product has built-in EMI filter and complies to Mil-Std-461F/CE102-RE101 requirements. Read More

Rebutor had signed distributor and value added partner agreement with KOLT-Turkey, an industry leader in design and manufacturing of Mil-Grade Brick DC-DC Converters, Filters,  Mil Grade AC-DC Power & Battery Chargers and EMI Filters compliance to Mil-Std-461, Mil-Std-810 and Mil-Std-704/1275 requirements for Ground Military, Airborne and Naval platforms.

KW Systems’s KAN-D Series AC-DC DIN Rail Mount SMPS for Industrial Applications. Convection cooling for all models of the series. High humidity, high efficiency rate (92-94%) and EMC (Class B, EN55022 (CISPR22).  Input voltage 80-264 VAC, 12-48VDC Output, Active PFC etc., Products for Oil-and-gas, Mining industry and Industrial power engineering and automation. Read More

EC2SBW-H series is Cincon’s new 4:1 input range DC-DC converter that provides 10W of regulated power in the industrial standard size of 1 x 1 inches. The input ranges are 9-36VDC and 18-74VDC. This series is available in single outputs of 3.3, 5, 12 and 15 VDC, and in dual outputs of ±12 and ±15 VDC. In addition, available in M2 grade which could operate at -55°C. Read More

Traco TIM 6 series is a cost efficient range of medical 6 Watt DC-DC converters in DIP-24 plastic package with wide 2:1 input voltage range. They provide a reinforced isolation system for 5000 VAC and a very low leakage current of less than 2 μA. The units are approved to IEC/EN/ES 60601-1 3rd ed. for 2 x MOPP and come along with an ISO 14971 risk management file.  Read More

Voltbricks VDRI6/10 Series Miniature DIP16 package multipurpose hi-rel isolated switching DC/DC converter with extended operational life for industrial applications. The VDRI6/10 series features 4:1 input range 9-36, 18-75VDC and single/dual output, Operating temp -40 to+105°C, protection SCP, OVP, Remote On/Off, Typical efficiency 92% and designed to MIL-STD-810, EN 60950. Read More

ECB40W18 series, an ultra-wide input DC-DC converter boasting an 18:1 ratio, providing a 40W of regulated output power. This compact unit is designed with dimensions of 2” x 1” inches (50.8 x 25.4 mm). The series holds safety certifications for IEC/UL 62368-1 and features 3000Vac isolation (input to output). Offering single outputs at 5, 12, 15, 24, and 54 VDC. Read More

Traco Power TEL 6 & TEL 6WI are two series of isolated 6 Watt converters which come in an ultra compact DIP-16 metal package. They solidify the new package standard in this power range with a power density of 1,6 W/cm³ by almost doubling the power density compared to 6 Watt converters in DIP-24 packages. Read More

Voltbricks VDRW 50 /100W Series -ultra-compact isolated Quarter brick DC to DC converters for railway application, industry standard pin outs. It has several features: wide range of operating emperatures (ambient −40…+85 °С), Remote On/Off, full range of protections: overcurrent, over temperature, short circuit).

CFM500S series is Cincon’s new 500W high-density class I AC-DC open frame power supply with baseplate cooling in a 3”X5” size. It has safety approvals for IEC/UL/EN 62368-1, and meets IEC/EN60335-1 for household appliances. Wide input range of 80-264Vac, it comes in 5 outputs of 12, 18, 24, 36 and 8VDC, and additional cover/case option.